10" / 250mm Bush Hammer with 6 Rollers

Product Description

This 10" /250mm bush hammer tool can be used with floor machines or powerful grinders for bush hammering of concrete floors and surfaces.  They have 6 rollers with 1"/ 25.4mm center bore size for appropriate floor grinding machines.

Adjustment of grit for bush-hammered surface

The Roughness of the bush hammered surface can be adjusted with our bush hammer through adjustment of spring elasticity on the bush hammer, or through the pressure of the manual grinding machine. Loosening spring elasticity or lessening pressure with increased roughness of hammering will result and tightening the springs or increasing machine pressure will reduce roughness to give the bush hammered surface a finer look.

Use and maintenance of bush hammer

- Operating Speed: 700-800 RPM

- Wet use strongly recommended and the more water the better

- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the tungsten steel

- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust

- Roller tips can be re-dressed with diamond blades when they become inefficient.